Dental Materials is multi-disciplinary and draws on all branches of science to combine them with manufacturing technology and design to overcome dental and maxillofacial (bones of the jaw and face) problems. Dental materials scientists study the processing, structure and properties of materials and the interactions of these materials with the tissues of the face and mouth. These programmes are an exciting part of our suite of medically related degrees. Both the BEng and MEng programmes contain specialist modules on dental materials, maxillofacial anatomy, biomaterials.
You will start with specialist modules from the first year, while gaining a solid foundation in materials engineering by studying core materials modules. In the 3rd year you will choose modules from a broad range of Dental Materials course options (see Programme Structure below). You can follow the links for details for each module, and also visit the SEMS website for information on projects and facilities.
Please note the modules are correct at the time of reading; however we constantly review and update our modules, meaning that they may be subject to change in the future.
The numbers in brackets indicate the academic level of each module, where a typical first year module is delivered at a level 4, whilst a master's module is delivered at level 7.
Typical grades required: ABB, must include two from Maths, Physics and Chemistry. The third subject can be any subject excluding General Studies and Critical Thinking.
Subjects and grades required: 32 points or above overall, with 3 subjects at Higher level with 6,6,5 points (including two from Maths, Physics and Chemistry).
To find out the entry requirements for other qualifications, please visit the School of Engineering and Materials Science website.
You may also contact the Admissions Coordinator:
Tel: +44 (0)20 7882 8736
Learning and teaching
As a student in the School of Engineering and Materials Science (SEMS) you will be taught through a combination of lectures, problem-solving classes, laboratory practicals, problem-based learning and a variety of coursework.
In the third year you will undertake a major project: an individual research project based around the in the current internationally-recognised research taking place in SEMS. This project will be based in the labs and gives you the opportunity to apply the theory you will have learnt in the first two years of study while taking advantage of the state-of-the-art facilities within SEMS.
All our programmes are available with an option to spend a year in industry as part of your course (normally after the second year). The year will significantly develop your communication, problem solving and team working skills. It will also give you invaluable experience to draw on when applying for positions after graduation. The School exploits its strong links with industry to help students find appropriate placements. Our Industrial Liaison Forum also encourages employers to sponsor and support students and to provide real design case studies to engage you throughout the course. Recent case studies were delivered by Bridgestone, DePuy, Apatech, Artis, Corus, BAE, DSTL and Rolls Royce. Find out more on the School of Engineering and Materials website.
All our degree programmes are structured with eight modules per year, split over two semesters. Some modules, such as the research and design projects, count for two or four modules. In the third and fourth years, you select from a range of module options allowing you to tailor your degree to specific areas of interest within your specialist degree programme, working in the SEMS laboratory Facilities. Assessment is continuous throughout your degree, with written reports, projects, presentations, group work and exams (exams take place in the summer).
Fees and finance
Tuition fees for Home and EU students
Tuition fees for International students
You can either take out a Tuition Fee Loan (see Funding section below) to pay your fees or, if you are paying them yourself, you can pay in instalments.
Tuition fees for a year abroad or placement year on a full time undergraduate course will be a proportion of the full fee for the year in which you commence your time abroad or placement.
For information on field trip and other course related costs which are not included in your tuition fee, please contact the relevant Department/School.
See more general information about fees.
Tel: +44 (0)20 7882 7676
Queen Mary has a substantial package of scholarships and bursaries which will benefit around 50 per cent of our undergraduate student body.
Scholarships and Bursaries available at Queen Mary for Home/EU Students
There are a number of scholarships and bursaries available each year for home students. Visit our Bursaries and Scholarships page for more information.
Visit our Advice and Counselling website for more information about financial support.
Scholarships available at Queen Mary for International Students
There are a number of Scholarships available each year for International Students including bursaries and scholarships in a range of subject areas.
Find out more about international scholarships.
Some International students may also be eligible for a fee reduction.
Loans and Grants available to help with tuition fees and living costs
Student Finance England administers all grant and loans for your studies if you normally live in England.
Through Student Finance England, you can apply for (figures relate to programmes starting from September 2016):
- A Tuition Fee Loan of up to £9,000 to pay all or part of your fees
- A Maintenance Loan of up to £10,702 to help pay your living costs like rent, food and travel
- Extra grants if you have a disability or you have children or an adult dependant
- You might get a grant to cover some travel expenses if you normally live in England but study away from home. If you’re a medical or dental student you might also qualify for help with the costs of attending clinical placements in the UK.
Visit Student Finance Information to find out more about:
- How to apply for student finance
- What eligibility rules apply, including if you already have a degree or previous higher education study
- What the income thresholds are and how much you might personally get for each element of Student Finance
- What to do if you have problems getting your Student Finance
Other financial help on offer at Queen Mary
We offer one to one specialist support on all financial and welfare issues through our Advice and Counselling Service, which you can access as soon as you have applied for a place at Queen Mary.
Our Advice and Counselling Service also has lots of Student Advice Guides on all aspects of finance including:
- Additional sources of funding
- Planning your budget and cutting costs
- Part-time and vacation work
- Money for lone parents
For more information visit the Advice and Counselling service website, or call +44 (0)20 7882 8717.
Graduates from Queen Mary’s School of Engineering and Materials Science go on to work in a wide variety of careers. Some apply their degree knowledge directly, entering careers such as aerospace engineering, manufacturing or hi-tech industries, whilst others transfer skills gained during study into areas such as consultancy, IT, or finance.
The national 2012 destination survey confirmed that 85% of Engineering and Materials Science graduates were in employment and/or study six months after graduation, with 72% already working/studying at graduate level. The School’s graduates have a strong earning power, with a median salary of £21,542.
The broad range of skills gained, coupled with multiple opportunities for extra-curricular activities and work experience, has enabled graduates from this school to move into careers such as:
- Researcher, Smith & Nephew Research Centre
- Clinical Scientist, Guy's and St Thomas' NHS Trust
- Biomedical Engineering Technician, King's College Hospital
- Technologist, National Metals Technology Centre
- Medical Engineer, Musgrove Park Hospital
- Clinical Trials Administrator, Medical Research Network
- Head Data Manager, Richmond Pharmacology
- Medical Engineer, King's College Hospital
- Higher Medical Device Specialist, MHRA
- Pharmaceutical Coordinator, Gulf
- Head Data Manager, Richmond Pharmacology
- Vocational Trainee Dentist Swiss Smile,
Throughout the course, students have access to an annual QM Careers and Enterprise Centre programme, to prepare them for internships and graduate level work. This includes employer led workshops on job applications and interviews as well as over 70 employer events to facilitate networks and help students to explore their options.
Recent careers events in the School of Engineering and Materials Science include a large employer and alumni networking forum and a weekly timetabled careers slot in which large and small employers provide information, advice and skills training. Last year over 100 companies and alumni came to speak to Queen Mary Engineering & Materials Science students, including De Puy, Mirel Plastics, Siemens, Morgan Crucible, Transport for London, Rolls Royce, BAA, EADS Astrium, Sugru, Bose, Microsoft, Qioptiq and Land Rover./p>
Opportunities for work experience are substantial given Queen Mary’s location between Canary Wharf, the City and the Olympic Village. Students are encouraged to build their work experience throughout their period of study. Opportunities can be found through QProjects, a local work experience scheme, QRecruit, which advertises internships and temporary work, Experience Works, a part time work fair, and volunteering with QMSU Provide. There are also over 1400 vacancies to browse on the QM JobOnline vacancy site.
Queen Mary’s extensive campus also provides over 1200 on-campus job and volunteer opportunities ranging from E-learning Assistant to Gym Instructor and from Society President to Student Mentor.
Read more about our careers programmes and range of work experience opportunities on the QM Careers and Enterprise Centre pages.
Degree: BEng in Dental Materials
Having always been interested in working in the healthcare industry, I was looking for alternative courses to medicine/dentistry (due to my aversion to blood!) when I came across Materials. It was the perfect combination of Maths and Sciences, both of which I thoroughly enjoyed! Dental Materials in particular supports the healthcare industry and is primarily concerned with studying the structure and properties of the materials found in the mouth and how to replace them artificially. It also appealed to me as it was a ‘new’ and upcoming course, and there is so much scope for research in this rapidly evolving field.
The primary reason was because it is part of the famous, ‘University of London’. It is a highly rated research department with state of the art equipment. Moreover QMUL is the only university in the UK to offer Dental Materials at an undergraduate level, It is also the only campus based university in London, only fifteen minutes from the city centre, and it is renowned for its vibrant, multicultural and cosmopolitan environment.
What do you do?
The course deals with various engineering and physiological subjects, the knowledge of which is built up gradually over 3 years. It mainly involves studying the structure, function and properties of the materials found in the mouth/body and then learning about and developing artificial materials with similar attributes to replace them. Since I am in my final year, I will be working on a project which involves research and, if successful, can be carried on to PhD level. I also represent the School of Engineering and Materials Science as an ambassador, which enables me to meet new people and promote the course and university to interested students and parents.
What is the best part of being a student here?
The School of Engineering and Materials Science is very friendly and, at the same time, we are taught by experts in their fields. PBL (problem based learning) forms a vital part of the curriculum and is a fun way to learn. It encourages team work and analytical thought processes, as well as improving time management and presentation skills. It also teaches us how to tackle real life industrial problems and what research involves. First year students are guaranteed a place in the halls of residence (ed. if they hand in all the paperwork by 30 June), which is a huge relief for someone moving away from home. Our Student Union is one of the best in London with a bar, several restaurants and a huge fitness centre. It also boasts a number of societies and communities, and affords an opportunity to meet people with similar interests who might not necessarily be on the same course.
What do you plan to do after graduation?
I have applied to the Graduate Entry Programme for Dentistry at QMUL, as I have really enjoyed my time here and would love to stay on. The other option is staying on to do a Masters or undertaking a PhD in this field.