World Wide Web version Prepared by G. P. Moss
School of Biological and Chemical Sciences, Queen Mary University of London,
Mile End Road, London, E1 4NS, UK
These Rules are as close as possible to the published version [see Eur. J. Biochem., 1983, 131, 5-7; Pure Appl. Chem., 1983, 55, 1269-1272; and in Biochemical Nomenclature and Related Documents, 2nd edition, Portland Press, 1992, pp 177-179. Copyright IUPAC and IUBMB; reproduced with the permission of IUPAC and IUBMB]. If you need to cite these rules please quote these references as their source. A PDF of the printed version is available.
Any comments should be sent to the current secretary of the Committee, or any other member of the Committee
Important Note: This version is formatted using the font symbol for Greek letters. If you cannot see a Delta (a triangle) in quotation marks next "Δ" click here for a version where Greek letters are created using graphic images.
1. GENERAL PRINCIPLES OF NOTATION
1.1. Direction of Numbering
Polysaccharides are macromolecules formed from many sugar units connected by glycosidic linkages. The chain is numbered from the reducing glycose residue to the non-reducing glycosyl group. Thus i refers to a particular saccharide unit in the polymer chain, (i - 1) to the adjacent unit in the direction away from the non-reducing end and (i + 1) in the direction of the non-reducing end. This direction of numbering is chosen so that gain or loss of a residue at the non-reducing end by transfer of a glycosyl group does not change the numbering of every unit in the chain. Some polysaccharides lack reducing end groups and are initiated by formation of a glycosidic linkage, e.g. to O1 (section 1.3) of another sugar, to an alditol or to an alcohol. For these polysaccharides the residue forming this glycosidic linkage is regarded as the first member of the chain.
1.2. Monomeric Unit
The monomeric unit is the monosaccharide. With complicated polysaccharides the primary structure should be given as described in 'Abbreviated terminology of oligosaccharide chains' . The oxygen of the glycosidic bond is part of the residue glycosylated. Since its position is of importance in specifying the unit, the torsion angle at the glycosidic bond is included in the characteristics of the sugar residue (section 2.2). The limits of an individual unit are shown in Fig. 4.
1.3. Atomic Numbering
The atom numbering of two monosaccharide units (a hexopyranose and a hexofuranose) is shown in Fig. 1. The notation used here conforms with that being proposed for specifying polynucleotide conformation. Atoms are thus designated C3, O2, H4, etc. The hydrogen atoms of a methylene group may be distinguished by an additional number, e.g. H61 and H62 where the lower number is selected for the pro-S atom . When it is necessary to indicate the particular saccharide unit its number may be added in parenthesis, e.g. O3(i ), C4(i+1), H61(i-1).
Fig. 1. Notation for atomic numbering of (A) a hexopyranose and (B) a hexofuranose unit [Names of A and B corrected]1.4. Interatomic Distances
In tabulating interatomic distances, non-bonded atoms are represented with a single dot between them, e.g. O2.C3, and covalent bonds are represented by hyphens between atoms, e.g. C1-C2. Hydrogen bonds are denoted by dotted lines whether or not the hydrogen is shown, e.g.
The interatomic distance may be symbolized as b(C1, C2); the symbol l is avoided because it can be confused with the numeral 1 and because l is used for vibration amplitude in electron diffraction (section 1.4 of reference 5).
1.5. Bond Angles
The bond angle included between three atoms A-B-C is written 'tau' as τ(A, B, C). If there is no ambiguity because the central atom is bivalent, this may be abbreviated to τ(B). The angle at the ring-oxygen atom of an aldopyranose may thus be written as τ(C1, O5, C5) or τ(O5).
1.6. Ring Shape
The ring shape of a sugar residue can be defined either by the endocyclic torsion angles (1.6.1) or in terms of the notation for conformations of five and six-membered monosaccharide rings (1.6.2).
1.6.1. Endocyclic Torsion Angles
In order to provide a complete description of the sugar ring conformation, it is necessary to specify the endocyclic torsion angles about at least some of the ring bonds, in addition to the bond lengths and bond angles. These ring torsion angles, denoted by the symbol ν(nu), can be described by adding a number indicating the bond as listed in Table 1 (see also Fig. 2). The torsion angle of the atoms A-B-C-D is the angle between A-B and C-D in a projection of the four atoms on to a plane normal to B-C. It is considered positive when the bond to the front, viewed along the central bond, must be rotated clockwise to eclipse the bond to the rear. For further details, see section 1.6 of the recommendations on polypeptide conformation  or the recommendations on stereochemistry .
Fig.2. Notation for torsion angles for (A) a hexopyranose and (B) a pentofuranose unit. The torsion angle 'ν' are defined in Table 1. The exocyclic torsion angles 'χ' are defined in section 1.7 [Names of A and B corrected]Table 1. Examples of torsion angles in sugar rings
1.6.2. General Notation of Residue Conformation
In many studies a complete description of the sugar ring in terms of torsion angles is not feasible and may perhaps be unnecessary. An easier description is possible by means of the conventional notation of 5 and 6-membered rings . In this notation the approximate conformation of the ring is indicated with an italic, capital letter, which designates the ring shape, and numerals, which distinguish between the variant forms of each shape. e.g. 4C1.
1.7. Conformation of Side Groups
A ring substituent of a pyranosidic sugar unit. e.g. a hydroxyl group, may be designated as being axial or equatorial in a given conformation.
For the precise specification of the orientation of a polyatomic ring substituent, it is necessary to specify the torsion angle about the exocyclic bond. The reference atom in the ring is the carbon atom with the number one lower than that of the substituted carbon, unless substitution is on the anomeric carbon, when the ring oxygen is the reference atom. The reference atom in an exocyclic-CH2X group is X. The exocyclic torsion angle is denoted by χ(chi), followed by the atoms to which it refers. e.g. χ(C1-C2-O2-H). or, if no ambiguity arises, simply by χ2 (Fig. 2 and 3).
Fig.3. Newman projections  showing the exocyclic torsion angleYY (A) View along the C5-C6 bond from C5 to C6, showing χ5; (B) view along the C2-O2 bond from C2 to O2, showing χ22. ORIENTATION OF THE GLYCOSIDIC LINKAGE
2.1. Designation of Bonds
The glycosidic bonds are part of the backbone of the polysaccharide. The glycosidic linkage is most easily described using the symbols for the monomeric units and the locants together with the anomeric descriptor, e.g. in cellobiose: Glc(i )(β1-4)Glc(i-1). If a more detailed description is necessary, this can be given in the form C1(i )-O4(i-1)-C4(i-l). The limits of the
Fig.4 Notation for the torsion angles specifying the orientation of glycosidic bonds for a pyranose unit (A) varrying a ring hydroxyl that is glycosylated and (B) in which the glycosylated hydroxyl group is on an exocyclic carbon. The limits of theTable 2. The torsion angle φ defining part of the glycosidic bond
i thresidue are indicated by the vertical dash lines. The residue number attached to φ, ψ and ω is conventionally that of the glycosylating residue.
|Aldopyranose||O5(i )-C(i )-OX(i-1)-CX(i-1)|
|Aldofuranose||O4(i )-C1(i )-OX(i-1)-CX(i-1)|
|Ulopyranose||O6(i )-C2(i )-OX(i-1)-CX(i-1)|
|Ulofuranose||O5(i )-C2(i )-OX(i-1)-CX(i-1)|
2.2. Torsion Angles
Two torsion angles, φ(phi) and ψ(psi), are required to describe the glycosidic bond from the
The torsion angle ψ about the bond from the glycosylated oxygen of the (i-1)th residue to a carbon of this residue (Fig.4) uses the carbon atom one lower in numbering as a reference atom. Since this angle relates to the mode of attachment of the ith residue. it may be designated ψ(i )
When the glycosidic bond does not involve a carbon atom located in the ring. but rather on a side chain. the angle. ω(omega), around the next C-C bond is also of importance. For a 16 linked aldohexopyranose, this angle is the exocyclic angle χ5 of the (i-1)th residue. Nevertheless it may be designated as ω(i ) (Fig.4B) since it refers to attachment of the
3. HELIX CHARACTERISTICS
In the description of helices or helical segments the following symbols may be used:
n = number of repeating units per turn
h = unit height (translation per repeating unit along the helix axis)
t = 360deg./n = unit twist (angle of rotation per repeating unit about the helix axis)
p = pitch height of helix = n . h.
Note. The repeating unit in a homopolysaccharide is a sugar residue. Heteropolysaccharides may possess repeating units of two or more residues, e.g. [-6)Glc(β1-4)GalA(β1-]n, .
A polysaccharide may be described accurately in terms of the polar atomic co-ordinates ri, φi, zi, where for each atom i, ri is the radial distance from the helix axis, and φi and zi are the angular and height differences respectively, relative to a reference point. The reference point should be a symmetry element, or, if no symmetry element between polysaccharide chains is present, the C1 atom of a monosaccharide.
1. IUPAC Commission on the Nomenclature of Organic Chemistry (CNOC) and IUPAC-IUB Commission on Biochemical Nomenclature (CBN) Tentative rules for carbohydrate nomenclature. Part 1, 1969, Biochem. J. 125, 673-695 (1971); Biochemistry, 10, 3985-4004 and 4995 (1971); Biochim. Biophys. Acta, 244, 223-303 (1971); Eur. J. Biochem. 21, 455-477 (1971) and 25, 4 (1972); J. Biol. Chem. 247, 613-635 (1972); also on pp. 174-195 in . [Revised version now available]
2. International Union of Biochemistry (1978) Biochemical Nomenclature and Related Documents, The Biochemical Society, London. [2nd edition, Portland Press, 1992]
3. IUPAC-IUB Joint Commission on Biochemical Nomenclature (JCBN) Conformational nomenclature for five and six-membered ring forms of monosaccharides and their derivatives, Recommendations 1980. Arch. Biochem. Biophys. 207, 469-472 (1981); Eur. J. Biochem. 111, 295-298 (1980); Pure Appl. Chem. 53, 1901-1905 (1981).
4. IUPAC-IUB Joint Commission of Biochemical Nomenclature (JCBN) Abbreviated terminology of oligosaccharide chains, Recommendations 1980, Eur. J. Biochem. 126, 433-437 (1982); J. Biol. Chem. 257, 3347-3351 (1982); Pure Appl. Chem. 54, 1517-1522.
5. IUPAC-IUB Joint Commission on Biochemical Nomenclature (JCBN) Abbreviations and symbols for the descriptive of conformations of polynucleotide chains, Recommendations 1982, Eur. J. Biochem. 131, 9-15 (1983). [See also Proceedings of the 16th Jerusalem Symposium "Nucleic Acids, the Vectors of Life" (edited B Pullman and J Jortner) 1983, 559-565; Pure Appl. Chem., 1983, 55, 1273-1280; Biochemical Nomenclature and Related Documents, 2nd edition, Portland Press, 1992, pages 115-121.]
6. IUPAC-IUB Commission on Biochemical Nomenclature (CBN) Abbreviations and symbols for the description of the conformation of polypeptide chains, Tentative rules 1969 (approved 1974), Arch. Biochem. Biophys. 145, 405-421 (1971); Biochem. J. 121, 577-585 (1971); Biochemistry, 9, 3471-3479 (1970); Biochim. Biophys. Acta, 229, 1-17 (1971); Eur. J. Biochem. 17, 193-201 (1970); J. Biol. Chem. 245, 6489-6497 (1970); Mol. Biol. (in Russian) 7, 289-308 (1973); Pure Appl. Chem. 40, 291-308 (1974); also on pp. 94-102 in . [See also Biochemical Nomenclature and Related Documents, 2nd edition, Portland Press, 1992, pages 73-81.]
7. IUPAC Commission on the Nomenclature of Organic Chemistry (CNOC) Rules for the nomenclature of organic chemistry, Section E: Stereochemistry, Recommendations 1974, Pure Appl. Chem. 45, 11-30 (1976); also on pp. 1-18 in  and on pp. 473-490 in . [See also Biochemical Nomenclature and Related Documents, 2nd edition, Portland Press, 1992, pages 1-18.]
8. International Union of Pure and Applied Chemistry (1979) Nomenclature of Organic Chemistry, Sections A, B, C, D, E, F, and H (Rigaudy, J. & Klesney, S. P., eds) Pergamon Press, Oxford.