Fused Ring and Bridged Fused Ring Nomenclature
(IUPAC Recommendations 1998)

FR-8.4 Naming of bridged fused ring systems

Continued from FR-8.3 Naming of Bridges

Contents of Section

FR-8.4 Naming of bridged fused ring systems
FR-8.4.1 Order of citation of bridges
FR-8.4.2 Attachment locants
FR-8.4.3 Choice of attachment locants
FR-8.4.4 Treatment of identical bridges
FR-8.5 Bridged fused ring systems where replacement nomenclature is used
FR-8.6 Numbering of bridge atoms
FR-8.7 Order of numbering bridges

Continue with FR-9 Indicated Hydrogen


FR-8.4 Naming of bridged fused ring systems

FR-8.4.1 Order of citation of bridges

If there is more than one bridge they are cited in alphabetical order unless one is dependent on another (see FR-8.7.a). In this case the dependent bridge is cited in front of all independent bridges. Identical bridges of the same order are quoted using the appropriate multiplicative prefix (see FR-8.4.4).

FR-8.4.2 Attachment locants

The fused ring system is numbered in the usual way (see FR-5).

a. Symmetric bridges

The locants of the positions on the fused ring system to which the bridge is attached are cited in numerical order in front of the bridge.

Example:


9,10-methanoanthracene

b. Asymmetric bridges
The locants of the positions on the fused ring system to which the bridge is attached are cited in the order implied by the name of the asymmetric bridge (locant order for the free valencies of the bridge is given by FR-8.3). If there is a choice, locants are cited in numerical order. See FR-9.3.2 for the use of indicated hydrogen.

Examples:


2H-3,5-(epoxymethano)furo[3,4-b]pyran error details


4a,8a-prop[1]enoquinoline


2H-5,3-(epoxymethano)furo[2,3-c]pyran
Beilstein name 2H-5,3-oxaethano-furo[3,4-b]pyran


10,5-[2,3]furanobenzo[g]quinoline


1-oxa-5,9,2-(ethane[1,1,2]triyl)cycloocta[1,2,3-cd]pentalene

FR-8.4.3 Choice of attachment locants

If there is a choice of attachment locants after the application of FR-8.4.2 preference is given in the following order:

a. The lowest set of locants for all the bridge attachment points considered as a set.

Examples:


1,4-epoxynaphthalene
not 5,8-epoxynaphthalene


5,8-epoxy-1,3-methanoanthracene
not 1,4-epoxy-5,7-methanoanthracene (1,3,5,8 preferred to 1,4,5,7)

b. Lowest locants in the order of citation for the bridges.

Example:


1,4-ethano-5,8-methanoanthracene

Note

CAS and Beilstein select when there is a choice of attachment locants those which result in lower numbers for heteroatoms in preference to the above criterion. (See FR-8.6 for numbering of bridge atoms.)

Examples:


9,10-(epoxymethano)anthracene
CAS name 10,9-(epoxymethano)anthracene and
Beilstein name 10,9-oxaethano-anthracene (hence oxygen is atom 11 not 12)


1,4-epoxy-5,8-methanonaphthalene
CAS name 5,8-epoxy-1,4-methanonaphthalene
Beilstein name 5,8-epioxido-1,4-methano-naphthalene


1H-4,9-[2,3]thiophenobenzo[f]isoindole
CAS name 4,9[2',3']-thiopheno-1H-benz[f]isoindole


3H-4,9-[2,3]thiophenobenzo[f]isoindole
CAS name 4,9[3',2']-thiopheno-1H-benz[f]isoindole

Note
See FR-9.3.2 for the use of indicated hydrogen and FR-8.6 for numbering of bridge atoms.

FR-8.4.4 Treatment of identical bridges

When there are two or more identical bridges this is indicated by the use of di-, tri-, etc. with single bridges (or bis-, tris- etc. with composite bridges or if di-, tri-, etc. would be ambiguous). The locants of the bridges are separated by a colon.

Examples:


1,4:5,8-dimethanonaphthalene


1,4:8,5-bis(epoxymethano)anthracene
Beilstein name 1,4;8,5-bis-oxaethano-anthracene


5,12:6,11-di[1,2]benzenodibenzo[a,e][8]annulene
CAS name 5,12[1',2']:6,11[1",2"]dibenzenodibenzo[a,e]cyclooctene
Beistein name 5,12:6,11-di-o-benzenodibenzo[a,e]cyclooctene

FR-8.5 Bridged fused ring systems where replacement nomenclature is used

If the fused ring system can only be named using replacement nomenclature (see FR-7.1) any heteroatoms in a bridge are also named using replacement nomenclature. The replacement terms are cited in front of the name of the corresponding hydrocarbon bridged fused ring system.

Examples:


2,3,9-trioxa-5,8-methanocyclopenta[cd]azulene
CAS name 5,8-epoxy-2,3-dioxacyclopent[cd]azulene
Beilstein name 2,3-dioxa-5,8-epioxido-cyclopent[cd]azulene


1H-3,10-dioxa-2a1,5-ethanocycloocta[cd]pentalene
CAS name 4H-9,9b-(epoxymethano)-2-oxacycloocta[cd]pentalene
Beilstein name 8H-3,12-cyclo-furo[3',2':1,5]cyclopenta[1,2-c]oxonine


2H,5H-4,6,11-trioxa-1-thia-5,8b-[1,2]epicyclopentacyclopenta[cd]-s-indacene
CAS name 2H,5H-5,8b[2',3']-furano-4,6-dioxa-1-thiacyclopent[cd]-s-indacene
Beilstein name 2H,5H-4,6-dioxa-1-thia-5,8b-[2,3]furano-cyclopent[cd]-s-indacene

Note

CAS and Beilstein use the appropriate bridge name which includes the heteroatom when replacement prefixes are needed to name the fused ring system. CAS cites the bridge prefixes before replacement prefixes, whereas Beilstein cites replacement prefixes before bridge prefixes.

FR-8.6 Numbering of bridge atoms

Bridge atoms are numbered continuing from the highest locant of the fused ring system. If there is more than one bridge atom (excluding hydrogen) the numbering starts at the chain end or ring atom connected to the bridgehead possessing the highest number. With a composite bridge each component of the composite bridge is completely numbered before the next component. If there is a choice of numbers then preference is given in the following order to:

a. low locants for heteroatoms

b. low locants for bridgehead atoms within a bridge

c. the remaining atoms (excluding hydrogen) being numbered continuously

Examples:


1,4-ethanonaphthalene


9,10-[1,2]benzenoanthracene


10,5-[2,3]furanobenzo[g]quinoline


12H-5,10-[2,5]epipyranobenzo[g]quinoline


6,13-(methano[1,2]benzenomethano)pentacene
Beilstein name 1(1,2)-benzena-3(6,13)-pentacena-cyclobutaphane


6b,12b-[1,8]naphthalenoacenaphthyleno[1,2-a]acenaphthylene

FR-8.7 Order of numbering bridges

a. Independent bridges are numbered before dependent bridges.

Example:


13,16-epoxy-1,4:5,8-diepoxy-9,10-[1,2]benzenoanthracene
(13,16-epoxy is a dependant bridge)

b. If there is more than one bridge of the same order preference is given to the bridge attached to the bridgehead with the higher locant at the first point of difference.

Examples:


1,4-ethano-5,8-methanoanthracene


6,14:7,14-dimethanobenzo[7,8]cycloundeca[1,2-b]pyridine


6b,12a-([1,3][2]benzofurano)-7,12-epoxybenzo[k]fluoranthene

c. If two bridges are attached to the same bridgehead atoms they are numbered in alphabetical order.

Examples:


6,13-ethano-6,13-methanodibenzo[b,g][1,6]diazecine


Continue with FR-9 Indicated Hydrogen.

Return to home page for Fused Ring Nomenclature.